Compaq COM Express Extension Manuel d'utilisateur télécharger pdf (Page 14)

6 Compaq TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure

Compaq Confidential – Need to Know Required

Writer: Bob Young Project: Compaq TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure Comments:

Part Number: ER-TL891-DA. B01/127511-002 File Name: b-ch1 Adding a Second Drive.doc Last Saved On: 11/3/99 9:42 AM

Replacing

To replace the cover plate on the Base Module:

1. Place the cover plate on the Base Module so that it overhangs one-half

inch at the rear of the module (Figure 3).

2. Slide the cover plate toward the front of the Base Module until the cover

plate touches the front panel.

3. Tighten the captive screw in the center of the cover plate.

4. Connect the power and interface cables at the rear of the module.

5. If the Base Module is a desktop model, replace the skin cover as

described in “Removing and Replacing the Skin Cover (Desktop Models

Only).”

SHR-1203

Figure 3. Removing the cover plate

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Compaq COM Express Extension Manuel d'utilisateur Page 14