Compaq DIGITAL Server Cluster Kits for Windows NT Guide d'installation télécharger pdf (Page 53)

Chapter 6. Using Secure Path Manager

EK-WNTMP-MH. D01 123995-002 6-13

6.11.1 No Preferred Path Detectable upon Server Boot

If, during server boot operations, Secure Path is unable to detect the preferred path to one

or more devices due to component failure ( i.e., a broken SCSI adapter), it indicates this

condition through the use of a special warning icon. The warning icon, (a yellow circle

containing the letter “M” crossed out with a red line), shown in Figure 6-8, overlays the

normal icon of each device known to be affected. Because the integrity of the no-single-

point-of-failure Secure Path configuration is severely compromised in this situation, the

Manager locks out all attempts to manually move any device to an alternate path,

including devices that still appear to have both paths available.

Figure 6–8 Secure Path Indicates when Preferred Path is Undetectable

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 73 74

Pas de commentaire

Compaq DIGITAL Server Cluster Kits for Windows NT Guide d'installation Page 53