Compaq StorageWorks 2/24 - Edge Switch Guide d'installation télécharger pdf (Page 96)

2-70 edge switch 2/32 installation guide

Installing and Configuring the Edge Switch 2/32

5. Connect the switch-attached fiber-optic cable to the port SFP transceiver.

6. If the switch is managed by an attached HAFM server, go to step 7. If the switch is

managed by the Embedded Web Server interface:

a. Choose View at the left side of the window. The View window opens with the

Switch tab selected and displayed.

b. At the View window, click the Port Properties tab. The Port Properties page

displays with 0 selected, and port information listed for port 0.

c. Choose the port number of the port used to make this ISL connection.

d. Ensure the Operational State field displays Online and the Reason field

displays N/A or is blank. If an ISL segmentation or other problem is indicated,

refer to the hp StorageWorks edge switch 2/32 service manual to isolate the

problem. If no problems are indicated, installation tasks are complete.

7. At the HAFM server’s Product View page, double-click the switch icon. The

Hardware View page for the selected switch displays.

8. Double-click the port connector used to make this ISL connection to open the

Port Properties dialog box, as shown in Figure 2–48.

Figure 2–48: Port Properties dialog box

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 143 144

Pas de commentaire

Compaq StorageWorks 2/24 - Edge Switch Guide d'installation Page 96