Compaq ProLiant DL388e Guide de l'utilisateur télécharger pdf (Page 55)

Hardware options installation 55

Install the hard drive.

4. Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations ("SAS and

SATA hard drive LED combinations" on page 18).

Removing a hot-plug SAS hard drive

CAUTION: For proper cooling do not operate the server without the access panel, baffles,

expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize

the amount of time the access panel is open.

1. Determine the status of the hard drive from the hot-plug SAS hard drive LED combinations ("SAS and

SATA hard drive LED combinations" on page 18).

2. Back up all server data on the hard drive.

3. Remove the hard drive.

Flash-backed write cache module option

To install the component:

CAUTION: Do not use this controller with cache modules designed for other controller models,

because the controller can malfunction and you can lose data. Also, do not transfer this cache

module to a different controller module, because you can lose data.

1. Back up all data.

2. Close all applications.

3. Power down the server (on page 24).

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 126 127

Pas de commentaire

Compaq ProLiant DL388e Guide de l'utilisateur Page 55