Compaq ProLiant MicroServer Gen8 Guide de l'utilisateur télécharger pdf (Page 29)

Setup 29

Powering on and selecting boot options

1. Press the Power On/Standby button.

2. Check the server Power LED status . The LED flashes green to indicate that the AC power connection

is established.

3. During the initial server boot (POST), do one of the following:

o For advanced users, to modify the server configuration ROM default settings, press F9 when

prompted to enter the RBSU. By default, the RBSU runs in the English language.

o To retain the HP recommended default server configuration and install the operating system, press

F10 to initiate Intelligent Provisioning. Proceed to the next section.

For more information on automatic server configuration, see the HP ROM-Based Setup Utility User Guide on

the Documentation CD or the HP Intelligent Provisioning Information Library

(http://www.hp.com/go/intelligentprovisioning/docs).

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 98 99

Pas de commentaire

Compaq ProLiant MicroServer Gen8 Guide de l'utilisateur Page 29