Compaq ProLiant Spécifications télécharger pdf (Page 43)

2-30 Compaq ProLiant ML330e/ML330 Server Maintenance and Service Guide

Power Supply

To remove the power supply:

WARNING: To reduce the risk of electric shock or damage to the equipment:

■ Unplug the power cord before removing the power supply from the server.

■ Install the power supply before connecting the power cord to the power supply.

CAUTION: To avoid dropping the power supply, pull out and hold the power supply with a

firm grip.

1. Complete the preparation procedures. See “Preparation Procedures” earlier in this chapter.

2. Remove the front bezel. See “Front Bezel” earlier in this chapter.

3. Remove the access panel. See “Access Panel” earlier in this chapter.

4. Remove the four screws securing the power supply to the rear of the chassis

5. Slide the power supply forward, and then lift the power supply from the chassis

Figure 2-27. Removing the power supply

To replace the power supply, reverse steps 2 through 5.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 77 78

Pas de commentaire

Compaq ProLiant Spécifications Page 43