Compaq TL891 - DLT Tape Library Guide de l'utilisateur télécharger pdf (Page 75)

DLT MiniLibrary (TL891) - User’s Guide

5–18 EK–TL891–UG. A01

5.5 Using the Demo Submenu

The only User Diagnostic is found on the Demo submenu on the Maintenance

Menu. The submenu lists five demos, numbered 1 through 5. At present, only

Demo 1 is implemented. Demo 1 enables the user to fully exercise the library

robotics.

When you select Demo 1, the library robotics begin to move cartridges randomly

from slot to slot in the magazine, while reporting on the front panel the number

of passes. If all ten slots in the magazine are full, Demo 1 will load a cartridge

into DLT0 and leave it there. If you press the

button while Demo 1 is running,

the system will load a cartridge into DLT0, unless DLT0 is full. If you press the

button again, the cartridge is unloaded from DLT0 and returned to the

magazine. The

button causes DLT1 to be loaded and unloaded in the same

way.

Demo 1 will run continuously as long as the Base Module has power. To stop the

test, press the

Escape button. A flashing message appears on the display telling

you that the test is paused. Pressing the Escape button a second time terminates

Demo 1 and returns to the Maintenance Menu.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 112 113

Pas de commentaire

Compaq TL891 - DLT Tape Library Guide de l'utilisateur Page 75