Compaq MP1400 Guide de l'utilisateur télécharger pdf (Page 14)

MP1400 Microportable Projector 1-7

Part Number: part number 177284-001 - Writer: Marianne Silvetti - Saved by: Marianne Silvetti

Pages: 18 Words: 2366 Saved date: 05/12/004:32 PM File Name: Chap1.doc

Connecting the Projector to a Desktop Computer

1. Rotate the elevator foot to balance the projector.

2. Connect one end of the projector signal cable

the projector and the other end to the VGA connector

on the desktop computer and tighten the screws.

✎

If your computer has a digital connector, connect one end of

the digital flat panel (DFP) signal cable

to the digital

connector on the projector and the other end to the digital

connector on the computer. Connect either the VGA cable

OR the DFP cable; do not connect both cables.

✎

Be sure the signal cable aligns with the connector. Do not

force the cable onto the connector or you may damage the

signal cable or the projector.

3. Connect one end of the power cord

into the back

of the projector, and the other end to an electrical

outlet that is easily accessible and close to the

projector.

4. Turn on the projector first, then turn on the computer.



1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 68 69

Pas de commentaire

Compaq MP1400 Guide de l'utilisateur Page 14