Compaq ML310 - ProLiant - 128 MB RAM Spécifications télécharger pdf (Page 25)

Removal and Replacement Procedures

Bezel Blanks

To remove a bezel blank from the front bezel:

WARNING: To reduce the risk of personal injury and to prevent damage to the

equipment, before removing the front bezel, be sure that the server is powered down,

all cables are disconnected from the back of the server, and the power cord is

disconnected from the grounded AC outlet.

NOTE: It is not necessary to remove a bezel blank when installing a hard drive into a removable media

bay.

1. Remove the front bezel. Refer to “Front Bezel” in this chapter.

2. On the back of the front bezel, pinch the tabs on each end of the bezel blank toward each

other (1), and then push the bezel blank through the front bezel (2).

Figure 2-4: Removing a bezel blank

To replace a bezel blank, reverse steps 1 and 2.

HP ProLiant ML310 Server Maintenance and Service Guide 2-9

HP CONFIDENTIAL Codename: Son of Beast Part Number: 274429-005 Last Saved On: 4/16/03 8:44 AM

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 89 90

Pas de commentaire

Compaq ML310 - ProLiant - 128 MB RAM Spécifications Page 25