Compaq ML310 - ProLiant - 128 MB RAM Spécifications télécharger pdf (Page 53)

Removal and Replacement Procedures

System Board

CAUTION: Electrostatic discharge (ESD) can damage electronic components. Be sure that

you are properly grounded (earthed) before beginning any installation procedure. Refer to

“Electrostatic Discharge Information” in this chapter for more information.

To remove the system board:

1. Complete the preparation procedures. Refer to “Preparation Procedures” in this chapter.

2. Remove the access panel. Refer to “Access Panel” in this chapter.

3. Remove all expansion boards seated on the system board.

4. Disconnect all cables from the system board.

5. Remove the seven screws securing the system board to the chassis (1).

6. Slide the system board away from the back of the server, and then pull the system board

out of the chassis (2).

Figure 2-32: Removing the system board

To replace the system board, reverse steps 2 through 6.

HP ProLiant ML310 Server Maintenance and Service Guide 2-37

HP CONFIDENTIAL Codename: Son of Beast Part Number: 274429-005 Last Saved On: 4/16/03 8:44 AM

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 89 90

Pas de commentaire

Compaq ML310 - ProLiant - 128 MB RAM Spécifications Page 53