Compaq ProLiant DL388p Spécifications télécharger pdf (Page 48)

Removal and replacement procedures 48

Remove the fans ("Hot-plug fan" on page 40).

8. Remove the fan cage.

To replace the component, reverse the removal steps. When re-installing the fans, press down on the top of

each fan to be sure it is seated properly.

Expansion slot covers

CAUTION: To prevent damage to the server or expansion boards, power down the server and

remove all AC power cords before removing or installing the PCI riser cage.

CAUTION: For proper cooling do not operate the server without the access panel, baffles,

expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize

the amount of time the access panel is open.

1. Power down the server (on page 26).

2. Extend the server from the rack (on page 27).

3. Remove the access panel ("Access panel" on page 31).

4. Remove the PCI riser cage ("PCI riser cage" on page 33).

5. Remove the expansion slot cover:

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 110 111

Pas de commentaire

Compaq ProLiant DL388p Spécifications Page 48