Compaq ProLiant SL165s Spécifications télécharger pdf (Page 33)

Removal and replacement procedures 33

System cover

You need to remove the top cover before you can remove or replace a server component. The top

cover needs to be removed to service the SAS/SATA backplane.

Top cover

To remove the top cover:

1. Loosen the screw on the top cover with a T-10 wrench.

2. Press the latch on the top cover.

3. Slide the cover toward the rear of the server and then lift the top cover to remove it from the

chassis.

Figure 1

Removing the Top Cover

To reinstall the top cover:

1. Align the top cover to the chassis and then slide it towards the front panel to position it into

place.

2. Once the cover is attached to the chassis, tighten the screw on the top cover with a T-10 wrench.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 116 117

Pas de commentaire

Compaq ProLiant SL165s Spécifications Page 33