Compaq ProSignia 500 Spécifications télécharger pdf (Page 54)

MAINTENANCE & SERVICE GUIDE
PROSIGNIA NOTEBOOK 190
INDEX PAGE PRODUCT DESCRIPTION LEGAL NOTICE HOW TO USE THIS GUIDE
REMOVAL & REPLACEMENT ILLUSTRATED PARTS CATALOG TROUBLESHOOTING SPECIFICATIONS
Removal & Replacement
Service Considerations
Listed below are some of the considerations that you should keep in mind during the
disassembly and assembly of the computer:
Tool Requirements
To service the computer, you need the following:
Torx T-8 screwdriver (with option for flathead on most screws)●   
7mm (1/4 in.) socket nut driver (for removal of Docking connector to remove system
board)
●   
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used during
the reassembly process, it can damage the unit. Compaq strongly recommends that all screws
removed during disassembly be kept with the part that was removed, then returned to their
proper locations.
Plastic Parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care
when handling the plastic parts. Apply pressure only at the points designated in these
maintenance instructions.
IMPORTANT:  
As each subassembly is removed from the computer, it should be placed away
from the work area to prevent damage.
 
Continue Preliminary pages:
Cables & Connectors
Preparing Computer for Disassembly
 

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 140 141

Commentaires sur ces manuels

Pas de commentaire

Compaq ProSignia 500 Spécifications Page 54

Commentaires sur ces manuels

Produits connexes et manuels pour Serveurs Compaq ProSignia 500