Compaq PC CARD ADAPTER Manuel d'utilisateur télécharger pdf (Page 53)

Using the TokenDisk Diskette Diagnostic Program 6-7

2 Press [Tab] to move from ﬁeld to ﬁeld and highlight any

ﬁeld within the Test Setup dialog box.

Within the Group Select area, use the arrow keys to

highlight Group 1 or Group 2. Use the <Enable Group> or

<Disable Group> command buttons to enable or disable a

group of tests.

Press [F1] for a description of these tests.

3 When you are satisﬁed with the new test setup, highlight

the <OK> command button and press [Enter].

4 To run the tests, choose Run Tests from the Test menu and

select the <Start> button.

When Tests Fail

If the diagnostic tests fail, the adapter may not be defective.

The problem may be incorrect conﬁguration settings,

conﬁguration settings that conﬂict with the settings of other

boards, or improper installation.

If any test fails, you can get additional information by

highlighting the test that failed in the Run Tests dialog box

shown in Figure 6-4, and pressing [Enter]. You can also

highlight the <Zoom> command button and press [Enter].

The program notiﬁes you of the error and suggests actions

you can take to solve the problem.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 75 76

Pas de commentaire

Compaq PC CARD ADAPTER Manuel d'utilisateur Page 53