Compaq StorageWorks 1000 - Modular Smart Array Manuel de service télécharger pdf (Page 75)

15593

3. Close the ejector lever against the front of the hard drive (2).

4. Verify that the hard drive is ﬁrmly engaged and that the ejector lever is latched.

CAUTION:

Datacanbelostiftheharddriveisnotﬁrmly seated.

5. As the hard drive begins to spin, the drive LEDs will illuminate, indicating that the system has

recognized the new drive. In fault-tolerant conﬁgurations, allow the replacement hard drive to

be reconstructed automatically from parity data stored on the other hard drives. While the data

is being rebuilt, the LEDs will ﬂash.

Verifying proper operation

The hard drive LEDs light one at a time and then turn off together to indicate that the system has

recognizedthenewdrive. Infaulttolerantconﬁgurations, allow the replacement hard drive to be

reconstructed automatically with data from the other hard drives. While reconstruction is in progress,

theonlineLEDsﬂash.

maintenance and service guide

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 121 122

Pas de commentaire

Compaq StorageWorks 1000 - Modular Smart Array Manuel de service Page 75