Compaq 2000fc Spécifications télécharger pdf (Page 40)

Hard drive

NOTE: The hard drive spare part kit includes a hard drive bracket and hard drive connector. The

hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also

available in the Hard Drive Hardware Kit.

Description Spare part number

Supports the following 9.5 mm / 7.0 mm, 6.35 cm (2.5 in) SATA hard drives:

320 GB, 7200 rpm 634862-001

Hard Drive Hardware Kit (not illustrated, includes connector, bracket, and screws) 640878-001

Before removing the hard drive, remove the following components:

1. Battery (see

Battery on page 30)

2. Service door (see

Service door on page 31)

Remove the hard drive:

1. Use the rubber tab on the hard drive bracket (1) to move the hard drive to the left and disconnect

it from the hard drive adapter.

2. Lift the hard drive (2) out of the hard drive bay.

3. To replace the hard drive bracket, remove the four Phillips 3.0×3.0 screws (1) that secure the

hard drive bracket to the hard drive.

32 Chapter 4 Removal and replacement procedures

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 93 94

Pas de commentaire

Compaq 2000fc Spécifications Page 40