Compaq 2000fc Spécifications télécharger pdf (Page 58)

If it is necessary to replace the optical drive bezel, use a thin tool or an unbent paper clip (1) to

release the optical drive tray.

5. Use a flat-blade screw driver or similar tool to press on the optical drive bezel tab (2) to release

the optical drive bezel.

6. Release the left side of the optical drive bezel (3).

7. Remove the optical drive bezel (4).

8. If it is necessary to replace the optical drive bracket, position the optical drive with the rear panel

toward you.

9. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the

optical drive.

10.

Remove the optical drive bracket (2).

Reverse this procedure to install the optical drive.

50 Chapter 4 Removal and replacement procedures

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 123 124

Pas de commentaire

Compaq 2000fc Spécifications Page 58