Compaq 2000fc Spécifications télécharger pdf (Page 88)

If it is necessary to replace the display panel:

a. Release the display panel cable (1) from the clips built into the bottom edge of the

display enclosure.

b. Remove the four Phillips PM2.5×4.0 screws (2) that secure the display panel to the

display enclosure.

c. Lift the top edge of the display panel (3), and then swing it up and forward until it rests

upside down in front of the display enclosure.

d. Release the adhesive support strip (1) that secures the display panel cable to the

display panel.

e. Detach the display panel cable (2) from the display panel. (The display panel cable is

attached to the display panel with double-sided tape.)

80 Chapter 4 Removal and replacement procedures

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 123 124

Pas de commentaire

Compaq 2000fc Spécifications Page 88