Compaq Compaq TCP/IP Services for OpenVMS Manuel de service Page 144

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 228
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 143
SET INTERFACE
Parameters
interface
Required.
Specifies an interface name for the communication controller, such as RF1, RT1,
ZE0, XE0, SL0, SL1, SL2, PP0, PP1, PP2.
Qualifiers
/ARP
/NOARP
Optional. Default: /ARP.
Enables IP address-to-hardware address (Ethernet or FDDI) mapping.
/ARP is valid when you create an interface but not when you modify an existing
interface.
/AUTO_START
/NOAUTO_START
Optional. Default: /AUTO_START.
Valid for a SLIP or PPP interface. Automatically creates the interface when
TCP/IP Services starts.
/BROADCAST_MASK=IP_address
Optional.
Sets the Internet interface to receive all broadcast messages.
TCP/IP Services calculates the default by:
Using the network number from the network mask
Setting all bits in the host number field to 1
/C_BROADCAST_MASK=IP_address
Optional.
Sets the cluster broadcast mask to receive all broadcast messages.
The software calculates the default by:
Using the network number from the network mask
Setting all bits in the host number field to 1
/C_NETWORK=IP_address
Optional.
Sets the network mask of the cluster network. This mask is specific to the cluster
host network.
The software calculates the default by:
Setting the bits representing the network fields to 1
Setting the bits representing the host field to 0
/CLUSTER=host
/NOCLUSTER
Optional. Default: None.
2–124 Command Descriptions
Vue de la page 143
1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 227 228

Commentaires sur ces manuels

Pas de commentaire