Compaq Compaq TCP/IP Services for OpenVMS Manuel de service télécharger pdf (Page 107)

tcpdump

$ tcpdump tcp[13] & 3 != 0 and not src and dst net localnet

This example shows how to use the

tcpdump

utility to display the start

and end packets (the SYN and FIN packets) of each TCP conversation that

involves a nonlocal host.

$ tcpdump gateway snup and ip[2:2] > 576

This example shows how to use the

tcpdump

utility to display IP packets

longer than 576 bytes sent through gateway

snup

$ tcpdump ether[0] & 1 = 0 and ip[16] >= 224

This example shows how to use the

tcpdump

utility to display IP broadcast or

multicast packets that were not sent using Ethernet broadcast or multicast.

10.

$ tcpdump icmp[0] != 8 and icmp[0] != 0

This example shows how to use the

tcpdump

utility to display all ICMP

packets that are not echo requests or replies (that is, not PING packets).

11.

$ tcpdump -s 1500 -envv ipv6 and udp port 521

This example shows how to use the

tcpdump

utility to display all RIPv6

packets.

12.

$ tcpdump -s 1500 -envv ipv6 and ether host a:b:c:d:e:f

This example shows how to use the

tcpdump

utility to display all IPv6 packets

arriving at or departing from a host with the Ethernet address

a:b:c:d:e:f

Troubleshooting Utilities Reference A–45

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 117 118

Pas de commentaire

Compaq Compaq TCP/IP Services for OpenVMS Manuel de service Page 107