Compaq DS10 Instructions d'exploitation télécharger pdf (Page 150)

3-38 DS10 / DS10L Console Reference

3.14.16 set com1_mode

The set com1_mode command specifies the COM1 data flow

paths, so that data either passes through the RMC or bypasses it.

See Section 3.3 for descriptions of the RMC modes.

Syntax: set com1_mode value

where value can be:

snoop

Data partially bypasses the RMC, but the RMC taps into

the data lines and listens passively for the RMC escape

sequence.

soft_bypass

Data bypasses RMC, but the RMC switches automatically

into snoop mode if an alert condition or loss of carrier

occurs.

Firm_bypass

Data bypasses the RMC. The RMC is

effectively disabled.

Example:

>>> set com1_mode

COM1_MODE (SNOOP,

SOFT_BYPASS,

FIRM_BYPASS)

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 181 182

Pas de commentaire

Compaq DS10 Instructions d'exploitation Page 150