Compaq 2000fc Guide de dépannage Page 51

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 52
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 50
Quick Troubleshooting Guide B-9
POST Error Messages Continued
Screen Message Beeps* Probable Cause Recommended Action
1800-Temperature Alert None Internal temperature
exceeds specification.
1. Check that computer air vents
are not blocked and cooling
fan is running.
2. Verify processor speed
selection.
3. Replace the processor.
4. Replace the system board.
1801 None Processor not supported by
ROM Bios.
Upgrade Bios to proper version.
Audible 1L, 3S System ROM is bad;
system is running in
Failsafe Boot Block mode.
Reflash the ROM using a ROMPaq
diskette. Refer to the “Failsafe
Boot Block ROM” section of the
Software Reference Guide.
Audible 2S Power-on successful. None
Flashing Caps Lock LED
on Keyboard
1L. 2S Graphics controller not
present or incorrectly
initialized.
1. Clear CMOS.
2. If graphics card has been
added, remove and reseat.
Flashing Num Lock LED on
Keyboard
1S, 2L System memory not
present
1. Check memory module.
2. Remove and reseat memory
module.
3. See “Memory Problems” in
Appendix A.
Num Lock LED on
Keyboard
None Failed Boot Block. Reflash the ROM using a ROMPaq
diskette.
Flashing Scroll Lock LED
on Keyboard
2L, 1S System board hardware
failure (prior to video)
Replace system board.
Green Power LED Blinks
Once per Second
None Computer in normal Suspend
mode.
None
Green Power LED ON None Computer on. None
Invalid Electronic Serial
Number
None Electronic serial number has
become corrupted.
Run Computer Setup (F10 Setup).
If Setup already has data in the
field or will not allow the serial
number to be entered, download
and run SP5572.EXE
(SNZERO.EXE).
* L = Long, S = Short
continued
Find Error Code
Click Here to Find Error Code
Click Here to Find Error CodeClick Here to Find Error CodeClick Here to Find Error Code
Vue de la page 50
1 2 ... 46 47 48 49 50 51 52

Commentaires sur ces manuels

Pas de commentaire