Compaq ProLiant SL165s Spécifications télécharger pdf (Page 56)

Removal and replacement procedures 56

To remove the air baffle:

1. Gently rock the air baffle up.

2. Take the air baffle out from the system board.

Figure 33 Removing the Air Baffle

NOTE: Due to the position of the two processors in the chassis, the heat sink of processor 2 blocks

the air from the system fans to the heat sink of processor 1, which results in insufficient cooling to

processor 1. In order to reach the system required thermal performance, the system is designed with

two different heat sinks. Please make sure to install the two heat sinks in the correct position.

To remove the heat sink:

1. Loosen the two spring-loaded screws.

2. Lift the heat sink away from the system board.

CAUTION: Place the heat sink down in an upright position with the thermal patch facing upward.

Do not let the thermal patch touch the work surface.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 116 117

Pas de commentaire

Compaq ProLiant SL165s Spécifications Page 56