Compaq ProLiant SL165s Spécifications télécharger pdf (Page 65)

Removal and replacement procedures 65

To remove the memory module:

1. Completely open the holding clips securing the memory module.

2. Gently pull the memory module upward to remove it from the slot.

Figure 46

Removing the Memory Module

CAUTION: Place the memory module on a static-dissipating work surface or inside of an anti-static

bag.

To install the memory module:

1. Align the notch on the bottom edge of the memory module with the keyed surface of the DIMM

slot and then fully press the memory module into the slot until the holding clips snap back in

place.

Figure 47

Installing the Memory Module

CAUTION: The DIMM slots are structured to ensure proper installation. If you insert a DIMM but it

does not fit easily into the slot, you may have inserted it incorrectly. Reverse the orientation of the

DIMM and insert it again.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 116 117

Pas de commentaire

Compaq ProLiant SL165s Spécifications Page 65