Compaq dx2818 - Microtower PC Spécifications télécharger pdf (Page 47)

Figure 7-2 Serial Number and Product ID Location – dx2818

Preparation for Disassembly

1. Close any open software applications.

2. Exit the operating system.

3. Remove any diskette or compact disc from the computer.

4. Turn off the computer and any peripheral devices that are connected to it.

CAUTION: Turn off the computer before disconnecting any cables.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as

long as the system is plugged into an active AC outlet. In some systems the cooling fan is on even

when the computer is in the “Standby,” or “Suspend” modes. The power cord should always be

disconnected before servicing a unit.

5. Disconnect the power cord from the electrical outlet and then from the computer.

6. Disconnect all peripheral device cables from the computer.

NOTE: During disassembly, label each cable as you remove it, noting its position and routing.

Keep all screws with the units removed.

CAUTION: The screws used in the computer are of different thread sizes and lengths; using the

wrong screw in an application may damage the unit.

Preparation for Disassembly 37

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 161 162

Pas de commentaire

Compaq dx2818 - Microtower PC Spécifications Page 47