Compaq dx2818 - Microtower PC Spécifications télécharger pdf (Page 65)

Removing an Optical Drive

CAUTION: All removable media should be taken out of a drive before removing the drive from the

computer.

To remove an optical drive:

1. Disconnect the power cable (1) and data cable (2) from the rear of the optical drive.

Figure 7-19 Disconnecting the Power and Data Cables

2. Remove the two screws that secure the drive to the drive cage (1), then slide the drive out of the

front of the chassis (2).

Figure 7-20 Removing the Optical Drive

NOTE: To install an optical drive, refer to Installing an Optical Drive into the 5.25-inch Drive Bay

on page 56.

Drives 55

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 161 162

Pas de commentaire

Compaq dx2818 - Microtower PC Spécifications Page 65