Compaq Compaq Portable II Spécifications télécharger pdf (Page 66)

releases the power supply assembly from the chassis.

7. Carefully lift the power supply assembly out of the chassis and gently

remove all remaining connectors from the board (Figure 7.8-9).

To replace the power supply assembly, reverse Steps 1 through 7.

NOTE: Be sure to securely tighten the mounting screw with the 5/16 inch box

end wrench because using only the socket extension wrench may not securely

tighten the mounting screw (thereby causing grounding problems).

COMPAQ Portable Fan/Bracket Assembly Removal and Replacement

To remove the fan/bracket assembly:

1. Complete the High Voltage Access Plate Removal Procedure

(see Section 7.5).

2. Disconnect the fan power connector from the power supply (Figure 7.8-10).

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 128 129

Pas de commentaire

Compaq Compaq Portable II Spécifications Page 66