Compaq AlphaServer GS60 Guide d'installation télécharger pdf (Page 18)

12 Upgrade Manual

6 Insert the Modules in the GS60E TLSB Card Cage

Determine the placement of the modules in the TLSB card cage. Inspect the

KN7CG module’s top row of pins on the large gray connector. If the plastic

portion of the connector obstructs the connector pin hole(s), the damage must be

repaired or the plastic will bend the backplane pins. Insert the I/O, memory,

CPU (GS60 to GS60E upgrade only), and terminator modules. Make certain the

EMI gaskets are in position and not damaged.

Figure 7 Inserting Modules in the GS60E TLSB Card Cage

BX-0768D-96

Front

CAUTION: If you add CPU modules, the modules shipped might have different

versions of console firmware. Results are unpredictable if you install all processor

modules at the same time and power up the system, so install each module

individually and update the console firmware on each if necessary. Follow the

instructions on the CPU installation card.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Pas de commentaire

Compaq AlphaServer GS60 Guide d'installation Page 18