Compaq AlphaServer ES40 Spécifications télécharger pdf (Page 117)

Using the Remote Management Console 4-15

4.6.1 Defining the COM1 Data Flow

Use the set com1_mode command from SRM or RMC to define the

COM1 data flow paths.

You can set com1_mode to one of the following values:

through

snoop

soft_bypass

firm_bypass

local

All data passes through RMC and is filtered for the escape

sequence. This is the default.

Data partially bypasses RMC, but RMC taps into the data lines

and listens passively for the escape sequence.

Data bypasses RMC, but RMC switches automatically into

snoop mode if loss of carrier occurs.

Data bypasses RMC. RMC remote management features are

disabled.

Changes the focus of the COM1 traffic to the local MMJ port if

RMC is currently in one of the bypass modes or is in through

mode with an active remote session.

Example

RMC> set com1_mode

Com1_mode (THROUGH, SNOOP, SOFT_BYPASS, FIRM_BYPASS, LOCAL): local

NOTE: For more details, see the Compaq AlphaServer ES40 User Interface

Guide.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 239 240

Pas de commentaire

Compaq AlphaServer ES40 Spécifications Page 117