Compaq Portable 486 - Notebook PC Spécifications télécharger pdf (Page 71)

8. Disconnect the fan assembly cable (Figure 5-15).

9. Using a Torx T-10 screwdriver, remove the screw securing the internal

keyboard connector to the display pan (Figure 5-15).

10. Using a Torx T-15 screwdriver, remove seven screws securing the I/O

board (Figure 5-15).

To replace the I/O board, reverse the steps in the above illustration.

Chapter 5.12 Base Panel

To remove the base panel, complete the following steps:

IMPORTANT: The base panel cannot be removed with the cable lock provision

pulled out. Be sure the cable lock provision is completely pushed in before

performing the following steps.

1. Push in the cable lock provision (Figure 5-16).

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 87 88

Pas de commentaire

Compaq Portable 486 - Notebook PC Spécifications Page 71