Compaq Portable 486 - Notebook PC Spécifications télécharger pdf (Page 73)

3. Using a Torx T-15 screwdriver, remove the screws securing the diskette

drive cage; then swing the drive cage out (Figure 5-17).

4. Using a Torx T-15 screwdriver, remove four screws securing the diskette

drive to the drive cage (Figure 5-17).

To replace the diskette drive, reverse the steps in the above illustration.

Fixed Disk Drive

To remove the fixed disk drive, complete the following steps:

1. Remove the base panel (Section 5.12).

2. Carefully disconnect the two cables from the fixed disk drive

(Figure 5-18).

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 87 88

Pas de commentaire

Compaq Portable 486 - Notebook PC Spécifications Page 73