Compaq Portable 486 - Notebook PC Spécifications télécharger pdf (Page 72)

2. Position the computer on the rear panel (Figure 5-16).

3. Using a Torx T-15 screwdriver, remove the screw from the base panel

(Figure 5-16).

4. Remove the base panel by sliding it out toward the diskette drive side of

the computer (Figure 5-16).

To replace the base panel, reverse the steps in the above illustration.

Chapter 5.13 Mass Storage Devices

Diskette Drive

To remove the diskette drive, complete the following steps:

1. Remove the base panel (Section 5.12).

2. Carefully disconnect the cable from the diskette drive (Figure 5-17).

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 87 88

Pas de commentaire

Compaq Portable 486 - Notebook PC Spécifications Page 72