Compaq Mega-Post Guide de l'utilisateur télécharger pdf (Page 13)

Chapter 2 Installing RedHat On MegaRAID 5

Step 2 Create Installation Diskettes, Continued

Windows 95/98 , Continued

Steps Description

After you have successfully created the first diskette, insert the second disk.

You can now start to create the post installation disk. Type the same command

again followed by <enter> to create the second installation diskette:

RAWRITE<enter>

You will again be prompted to enter the name of the boot image file. This time

type

post.IMG<enter>

Next, you will be prompted for the target disk drive. Insert a floppy disk into

the floppy disk drive and type

A<enter>

Once again, do not remove the disk until the command prompt returns and the

floppy disk drive light goes out.

If you have a dual processor system use postsmp.img instead of post.img

Congratulations! You should now have two floppies. Windows 95/98 can no

longer access these floppies. Proceed to Step 3 Installing RedHat.

Linux

Steps Description

Create the boot floppy using the following command:

dd if=/dev/fd0 of=boot.img

[root@localhost install]# dd if=/dev/fd0 of=boot.img

2880+0 records in

2880+0 records out

[root@localhost install]#

Create the Post Installation floppy using the following command:

dd if=/dev/fd0 of=post.img

[root@localhost install]# dd if=/dev/fd0 of=Oct5/amiboot.img

2880+0 records in

2880+0 records out

[root@localhost install]#

Congratulations! You should now have two floppies. Proceed to Step 3

Installing RedHat.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Pas de commentaire

Compaq Mega-Post Guide de l'utilisateur Page 13