Compaq Mega-Post Guide de l'utilisateur télécharger pdf (Page 23)

Chapter 4 Installing MegaRAID IDE on an Existing Installation 15

Installing MegaRAID IDE Driver

Download the zipped driver file for RedHat 6.1 and 6.2 from the LSI Logic web site

(http://www.lsilogic.com ). It contains the following files:

• Amiraid.o

• MAKEDEV

Create a directory called /usr/src/linux/drivers/block/amiraid and copy the above files to it.

Run the following command:

"./MAKEDEV"

To load Hyperconf driver run the command:

"insmod amiraid.o"

To unload the driver run the command:

"rmmod amiraid"

Note: The driver will not load unless you have created a RAID.

Installing the Monitoring software

The monitoring software is contained in the zipped driver you download in the last

section.

Install the monitoring software using the command:

"rpm –I hyperconf-1.0-x.i386.rpm"

Note: Substitute x for the version number.

For instructions on how to use the monitoring software see Chapter 3 Running Hyperconf.

1 2 ... 18 19 20 21 22 23 24 25 26

Pas de commentaire

Compaq Mega-Post Guide de l'utilisateur Page 23