Compaq Mega-Post Guide de l'utilisateur télécharger pdf (Page 20)

MegaRAID IDE Linux Installation User's Guide 12

Information

To obtain information about your system, press the <F10> and <Tab> keys to access

Information.

Item Description

Controller Here you will find information concerning the controller. The fields areas follows:

• Model

This is model of the MegaRAID IDE controller that you

have in your system

• PCI BUS

The BUS number

• PCI number

The PCI number

• Driver Version

The version of the driver software

• Primary Base Address

The Primary Base Address

• Primary Control Address

The Primary Control Address

• Secondary Base Address

The Secondary Base Address

• Secondary Control Address

The Secondary Control Address

• IRQ Level

The IRQ that is assigned to your device

Array

Here you will find information concerning the Array. The fields areas follows:

• Model

The RAID level

• Status

The status of the RAID. Online, Degraded or FAIDED.

• Stripe size

The stripe size on the RAID.

• Capacity

The capacity of the RAID.

• Mount Point

The directory where the RAID is mounted.

• Controller

The controller that the RAID belongs to.

• Physical Drives

The drives that are in the RAID.

Physical Drives Here you will find information concerning the Physical Drives. The fields areas follows:

• Model

The manufacture model of the drive.

• Serial Number

The Serial number of the drive.

• Firmware Revision

The Version of the firmware that is on the drive.

• Status

The status of the drive. It will read online or offline

depending on whether on not the drive is available.

• Error Count

The total number of compare errors on the drive.

• Controller

The controller that the drive is attached to.

• Array

The array to which the drive belongs

• Capacity

The capacity of the drive in gigabytes

• Transfer Mode

The transfer mode of the drive e.g. UDMA 2 = 33Mb/s

Error Log Log the RAID errors

Activity Log Logs activity on the RAID such as the RAID going degraded.

Mirror Mirror options include the following:

• Rebuild

Allows the user to start a manual rebuild if a RAID has

gone degraded

• Consistency Check

Allows for a manual start of a consistency check.

• Activity status

Log the status of a rebuild or consistency Check.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Commentaires sur ces manuels

Pas de commentaire

Compaq Mega-Post Guide de l'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Compaq Mega-Post