Compaq StorageWorks 4000 - RAID Array Guide de l'utilisateur télécharger pdf (Page 19)

Introduction

The Compaq RA4000 supports these Compaq hot-pluggable drives:

n 1.6-inch Fast SCSI-2

n 1.6-inch Fast-Wide SCSI-2

n 1.6-inch Wide-Ultra SCSI-3

n 1-inch Fast SCSI-2

n 1-inch Fast-Wide SCSI-2

n 1-inch Wide-Ultra SCSI-3

The RA4000 accepts both 1-inch and 1.6-inch standard height drives. The

drives must be mounted on Compaq hot-pluggable drive trays. SCSI IDs are

assigned automatically according to the drive location, allowing 1-inch and

1.6-inch drives to be intermixed easily.

The maximum number of drives that can be installed in the Compaq RA4000

is shown in the table below.

Both the 1-inch and 6-inch hard drives can be intermixed when installed in the

Compaq RA4000. To optimize capacity when intermixing drives, refer to the shadow

markings on the faceplate for appropriate 1-inch and 6-inch drive positions.

1-inch 12

1.6-inch 8

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 179 180

Pas de commentaire

Compaq StorageWorks 4000 - RAID Array Guide de l'utilisateur Page 19