Compaq StorageWorks 4000 - RAID Array Guide de l'utilisateur télécharger pdf (Page 48)

This section describes the operational features of the Compaq StorageWorks

RAID 4000.

Before applying power to the RA4000, all components of the storage system

must be installed and connected to the Storage Hub. Hard drives should be

installed in the RA4000 so that they can be identified and configured at power

up.

The StorageWorks RAID 4000 components must be powered up in the

following order:

1. Storage Hub(s)—Power is applied when the AC power cord is

plugged in.

2. RA4000(s)—Powered on with the power switch located in the upper left

corner of the front panel on tower systems or upper right on rack

systems.

3. Server(s).

The RA4000 is equipped with a series of LEDs located on strategic

components. With the exception of the LEDs located on the front panel, these

LEDs relate only to individual components.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 179 180

Pas de commentaire

Compaq StorageWorks 4000 - RAID Array Guide de l'utilisateur Page 48