Compaq StorageWorks 4000 - RAID Array Guide de l'utilisateur télécharger pdf (Page 70)

Troubleshooting

Figure 4-20. Installing the daughterboard

9. With the daughterboard installed, push the RA4000 Controller in as far

as it will go 1.

10. Close both latches against the rear panel 2. The levers on each latch

should catch behind the metal lip, drawing the board into place and

securing it.

Figure 4-21. Replacing the RA4000 Controller

11. Replace the GBIC and reconnect the Fibre Channel cable.

12. If the system was powered down, power on the RA4000, and then

power on the attached servers.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 179 180

Pas de commentaire

Compaq StorageWorks 4000 - RAID Array Guide de l'utilisateur Page 70