Compaq StorageWorks 4000 - RAID Array Guide de l'utilisateur télécharger pdf (Page 47)

Compaq StorageWorks RAID Array 4000 User Guide

After all hardware components are installed and the unit is in place, the power

can be connected.

1. Plug the AC power cord into the RA4000. The power supply

automatically senses the input voltage. It is not necessary to select the

correct main voltage.

TROJ011.EPS

Figure 2-15. Connecting the power cord

To reduce the risk of electric shock or damage to the equipment:

■ Do not disable the power cord grounding plug. The grounding plug is an

important safety feature.

■ Plug the power cord into a grounded (earthed) electrical outlet that is

easily accessible at all times.

■ Disconnect power from the storage system by unplugging all power cords

from either the electrical outlet or storage system.

2. Plug the power cord into a nearby, grounded outlet.

3. If a Redundant Power Supply has been installed, plug its AC power cord

into the power supply and then into a grounded outlet.

This completes the hardware installation of the Compaq StorageWorks

RAID 4000.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 179 180

Pas de commentaire

Compaq StorageWorks 4000 - RAID Array Guide de l'utilisateur Page 47