Compaq StorageWorks 4000 - RAID Array Guide de l'utilisateur télécharger pdf (Page 39)

Compaq StorageWorks RAID Array 4000 User Guide

To install the Hot-Pluggable drives into the RA4000:

1. Open the front door of the RA4000 (tower only).

2. Choose the bay location (SCSI ID) of the drive.

3. Refer to the markings on storage system front panel to find the correct

location of the drive tray. Markings for 1.6-inch drives are on the left

(top in rack systems), while 1-inch drives are on the right (bottom). The

1-inch and 1.6-inch drives can be intermixed as long as they conform to

the appropriate front panel markings.

4. Squeeze the latches on the drive tray 1and pivot the ejector levers

into the fully open position 2. Insert the drive into the correct drive bay.

Figure 2-7. Opening the latches

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 179 180

Pas de commentaire

Compaq StorageWorks 4000 - RAID Array Guide de l'utilisateur Page 39