Compaq Armada 1120T Guide de dépannage télécharger pdf (Page 129)

6. To replace the bezel, reverse the previous steps.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

The unit can become top-heavy when pressure is applied while replacing the

bezel. Supporting the unit with your hands will prevent it from falling

over.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Removing the Display Enclosure Latches and Springs

To remove the display enclosure latches and springs from either side of the

display enclosure, follow these steps:

1. Turn the computer off and remove all external devices, including the

battery pack and the AC Adapter. Remove the diskette and PC Card, if

installed (Section 5.3).

2. Open the computer.

3. Remove the display bezel. Refer to "Removing and Replacing the Display

Bezel" in this section.

4. Hold the bottom of the latch near the spring. Flex the hook end of the

display latch away from the display enclosure [1] (Figure 5-73).

5. Pull the display latch from the top, then out of the display enclosure

[2] (Figure 5-73).

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 197 198

Pas de commentaire

Compaq Armada 1120T Guide de dépannage Page 129