Compaq Armada 1120T Guide de dépannage télécharger pdf (Page 86)

Removing the CPU Cover

To remove the CPU cover for replacement, follow these steps.

1. Remove the keyboard assembly from the computer. Refer to "Removing the

Keyboard Assembly" in this section.

2. Turn the keyboard assembly topside down.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Note the position of the screws removed from the bottom of the keyboard

assembly. The remaining screws holes are for the screws that go through the

keyboard assembly to the CPU base.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

3. Remove the seven screws on the bottom of the keyboard assembly (Figure

5-19).

IMPORTANT: There is a light deflector located in the status panel. When

removing the CPU cover from the keyboard, the light deflector

will come loose. Be sure to replace it in the status panel when

replacing the CPU cover to the keyboard.

4. Separate the CPU cover from the keyboard (Figure 5-19).

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 197 198

Pas de commentaire

Compaq Armada 1120T Guide de dépannage Page 86