Compaq Armada 1120T Guide de dépannage télécharger pdf (Page 135)

To remove the inverter board for the CTFT (10.4 in) Display, follow these

steps:

1. Turn the computer off and remove all external devices, including the

battery pack and the AC Adapter. Remove the diskette and PC Card, if

installed (Section 5.3).

2. Open the computer.

3. Remove the display bezel. Refer to "Removing and Replacing the Display

Bezel" in this section.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

When servicing the computer, ensure that cables are placed in their proper

location to avoid pinching during the reassembly process. Improper cable

placement can cause severe damage to the unit.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

4. Lift up the inverter board until it clears the three posts on the

display enclosure (Figure 5-80).

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> WARNING <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

Ensure that the power cord is disconnected from the electrical outlet and

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 197 198

Pas de commentaire

Compaq Armada 1120T Guide de dépannage Page 135