Compaq Armada 1120T Guide de dépannage télécharger pdf (Page 77)

Handle Bracket

This procedure is necessary if replacing the handle bracket or if

separating the display assembly from the system unit module.

Removing the Handle Bracket

To remove the handle bracket, follow these steps:

1. Turn the computer off and remove all external devices, including the

battery pack and the AC Adapter. Remove the diskette and PC Card, if

installed (Section 5.3).

2. Close the computer and turn it topside down.

3. Move the tilt foot toward the front of the computer, exposing the

handle bracket screw on either side of the computer (Figure 5-7).

4. Remove the screw and washer from each handle bracket. These screws are

not reusable and must be discarded.

5. Remove the handle bracket (Figure 5-8).

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 197 198

Pas de commentaire

Compaq Armada 1120T Guide de dépannage Page 77