Compaq Armada 1120T Guide de dépannage télécharger pdf (Page 148)

10. Carefully insert the end of the display ground cable into the ZIF

connector slide on the system board.

IMPORTANT: Ensure that the ZIF connector slide is in its fully upward

position and that it remains so while you are inserting the

cable into it. Before closing the slide, ensure that the cable

is fully seated (to the white insertion line) in the ZIF

connector.

11. While holding the end of the display cable inside the ZIF connector

slide, press down both ends of the slide simultaneously to secure the

cable in the ZIF connector (Figure 5-97).

12. Ensure that the cable has been seated evenly and that the white line

on the cable is level.

13. Replace the keyboard assembly (Section 5.7).

Color TFT (10.4 in) Display

This section contains removal and replacement procedures for the following

CTFT (10.4 in) display components:

1 2 ... 143 144 145 146 147 148 149 150 151 152 153 ... 197 198

Pas de commentaire

Compaq Armada 1120T Guide de dépannage Page 148