Compaq Armada 1120T Guide de dépannage télécharger pdf (Page 168)

30. Connect the display ground cable [1] to the flex ground bracket above

the serial port connector between the system board and the system

chassis (Figure 5-121).

31. Carefully insert the end of the cable into the ZIF connector slide on

the system unit.

IMPORTANT: Ensure that the ZIF connector slide is in its fully upward

position and that it remains so while you are inserting the

cable into it. Before closing the slide, ensure that the cable

is fully seated (to the white insertion line) in the ZIF

connector.

32. While holding the end of the display cable inside the ZIF connector

slide, press down both ends of the slide simultaneously to secure the

slide,

press

cable in the ZIF connector (Figure 5-122).

down

both

ends

the

slide

simultaneously

secure

the

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 197 198

Pas de commentaire

Compaq Armada 1120T Guide de dépannage Page 168